TM 9-2320-269-20-2
HEATER ASSEMBLY, HEAT CONTROL, AND VENT CONTROL - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY
28.
Motor cover (9) to
Three sheet metal
Using 4-inch cross-tip screwdriver,
heater assembly (8)
screws (10)
unscrew and take out.
29.
Heater assembly (8)
Motor cover (9)
Take off.
30.
Motor mounting
Six sheet metal
Using 1 1/2-inch cross-tip screwdriver,
plate (11) and
screws (13)
unscrew and take out.
ground wire (12) to
heater assembly (8)
31.
Heater assembly (8)
Blower assembly (14)
Let drop to bottom of heater (8).
32.
Grommet (15)
Using flat-tip screwdriver, pry out.
33.
Red wire (16)
Pull into heater (8) through hole (17).
34.
Orange wire (18)
Pull into heater through hole (17).
35.
Blower assembly (14)
Lift, and take out.
TA229653
2-1275
Previous Page
