TM 9-2320-269-20-2
WINDSHIELD WASHER RESERVOIR AND PUMP
This task covers:
a. Removal (page 2-1220)
c.
Assembly (2-1222)
b. Disassembly (page 2-1221)
d.
Installation (page 2-1222)
INITIAL SETUP:
Tools
Materials/Parts
Container, l-qt
Detergent, liquid (item 11, appendix C)
Extension, 3/8-inch drive, 5-inch
Fluid, windshield washer (item 14,
Finger, mechanical
appendix C)
Handle, ratchet, 3/8-inch drive
Lockwasher, ground wire terminal-to-
Knife, pocket
bracket (four required)
Screwdriver, cross-tip, number two
Rags, wiping (item 24, appendix C)
Screwdriver, flat-tip, 3/16-inch,
Socket, 318-inch drive, 7/16-inch
Personnel Required
Socket, 3/8-inch drive, 13/16-inch
Wrench, box-end, 7/16-inch
One
Equipment Condition
Left side of hood open (TM 9-2320-269-20-1).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Pump assembly (1)
Hose (2)
a. Place container underneath to catch
fluid.
b. Pull off.
c. Get rid of fluid.
2.
Wire (3)
Unplug.
3.
Reservoir bracket
Two screws (6)
Using 7/16-inch wrench, unscrew and
bracket (4) to
take out.
splash panel (5)
4.
Two screws (7)
Using cross-tip screwdriver,
unscrew and take out.
5.
Splash panel (5)
Reservoir (8)
Take off.
and pump
assembly (1)
2-1220
Previous Page
