TM 9-2320-269-20-2
WINDSHIELD WASHER RESERVOIR AND PUMP - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY
12.
Reservoir (1)
Grommet (2)
a. Lubricate lightly with soap.
b. Using flat-tip screwdriver, work into
place.
13.
Pump assembly (3)
Put into place.
14.
Pump assembly (3)
Nylon washer (4)
Using mechanical finger, put in place.
15.
Filter (5)
a. Using mechanical finger, put in place.
b. Screw on, and tighten using 13116-inch
socket, extension, and handle.
Do not overtighten. Filter and pump
are plastic, and threads strip
easily.
16.
Bracket (6)
Reservoir (1)
Put in place.
and ground wire
terminal (7)
17.
Reservoir (1)
Four screws (8),
Screw on, and tighten using 7/16-inch
and ground wire
and lockwasher(9),
wrench, 7/16-inch socket, and handle.
terminal (7) to
and nuts (10)
bracket (6)
18.
Cap (11)
Gasket (12)
Push into place.
19.
Reservoir (1)
Cap (11)
a. Snap retainer ring of cap (11)
onto reservoir (1).
b. Snap cap shut.
INSTALLATION
20.
Splash panel (13)
Windshield washer
Put in place.
reservoir (1)
and bracket (6)
21.
Bracket (6)
Two screws (14)
Screw in, but do not tighten.
to splash panel (13)
22.
Two screws (15)
Screw in, and tighten using 7/16-inch
wrench.
2-1222
Previous Page
