TM 9-2320-269-20-2
WINDSHIELD WIPER ARM AND BLADE
This task covers:
a. Removal(page 2-1218)
b. Installation(page 2-1219)
INITIAL SETUP:
Tools
Materials/Parts
Screwdriver, flat-tip, 1/8-inch
Rags, wiping (item 24, appendix C)
Wrench, pliers
Personnel Required
One
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
The steps in this task are the same for either right or left wiper arm and blade. The left
wiper arm and blade is used as the example.
It is not necessary to remove wiper arm to replace blade.
1.
Wiper arm (1)
Blade (2)
a. Using flat-tip screwdriver, pry up
tab (3).
b. Take off blade.
2.
Blade (2)
Refill (4)
Remove (page 2-1216).
3.
Pivot (5)
Arm (6)
a. Cover pivot end of arm (6) with rag.
b. Clamp pivot end of arm (6) with pliers
wrench.
c. Using flat-tip screwdriver, pry back
tab (7).
d. Remove arm (6) using pliers wrench.
e. Take pliers wrench and rag off arm (6).
2-1218
Previous Page
