TM 9-2320-269-20-2
WINDSHIELD WASHER HOSE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION/REPLACEMENT
10.
Hoses (1), (2),
a. Inspect for out-of-round condition.
and (3)
b. If found to be out-of-round, cut
new length of hose using old
hose for measurement.
INSTALLATION
11.
Engine compartment:
Grommet (5)
a. Apply sealer as required.
firewall (4)
b. Work into place using flat-tip
12.
Inside cab: right
Hose (3)
Push onto nozzle tube, and route through
nozzle and pivot
steering column bracket (7).
Assembly (6)
13.
Left nozzle and
Hose (3)
Push onto nozzle tube, and route through
pivot assembly (8)
steering column bracket (7).
14.
Hose (2) to pivot
Tee (9)
a. Lubricate with detergent if necessary.
assembly (8)
b. Push on.
15.
Tee (9)
Hose (3)
a. Lubricate with detergent if necessary.
b. Push on.
16.
Grommet (5)
Hose (1)
Push through.
17.
Tee (9)
Hose (1)
a. Lubricate with detergent if necessary.
b. Push on.
18.
Engine compartment:
Hose (1)
Pull through enough hose to reach
grommet (5)
reservoir (10).
19.
Windshield washer
Hose (1)
Push on.
reservoir pump (11)
2-1226
Previous Page
