TM 9-2320-269-20-2
TANK - TO - EMERGENCY PUMP HOSE ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
1.
Hydraulic
Shutoff valve (2)
Using 1 1/16-inch wrench, turn and
tank (1)
close.
2.
Two 90 swivel
Tank-to-emergency
a. Position pail to catch hydraulic fluid.
adapters (3)
pump hose
b. Using 1-inch and 7/8-inch wrenches,
assembly (4)
unscrew and take off.
c. Take out of truck.
d. Dispose of drained fluid.
CLEANING
WARNING
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame nearby when using
solvent. Failure to observe these precautions could cause serious injury or death.
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-142).
3.
All metal parts
a. Clean in drycleaning solvent.
b. Wipe dry with clean, dry rags.
4.
Hose assembly (4)
a. Clean in clean, soapy water.
b. Rinse in clean water.
c. Wipe connectors clean with clean rags
dampened with drycleaning solvent.
d. Wipe dry with clean, dry rags.
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-142).
Replace damaged or defective parts as necessary.
5.
Hose assembly (4)
a. Look for cracks, breaks, tears,
and brittleness.
b. Look for loose connectors.
c. Look for damaged threads.
2-1206
Previous Page
