TANK - TO - PUMP HOSE

TM 9-2320-269-20-2

TANK - TO - PUMP HOSE

This task covers:

a. Removal

c. Inspection

e.

Pre-Load Check of Bearing

b. Disassembly

d. Reassembly

f.

Installation

INITIAL SETUP:

Tools

Materials/Parts

Handle, ratchet, 1/2-inch drive

Detergent, non-sudsing (item 12, appendix C)

Pail, utility, 6-qt

Rags, wiping (item 24, appendix C)

Screwdriver, flat-tip, 3/8-inch

Solvent, drycleaning (item 28, appendix C)

Socket, 1/2-inch drive, 11/16-inch

Wrench, open-end, 1 1/16-inch

Personnel Required

One

ACTION

LOCATION

ITEM

REMARKS

REMOVAL

WARNING

Avoid contact with hydraulic fluid. Hydraulic fluid, if splashed on skin or in eyes, can cause irritation.

1.

Hydraulic

Shutoff valve (2)

Using 1 1/16-inch wrench, turn off.

tank (1)

2.

Tank-to-

Two clamps (4),

a. Position pail to catch hydraulic fluid.

pump hose (3)

four screws (5),

b. Using 11116-inch socket and handle,

and nuts (6)

unscrew and take off.

3.

Dixon insert (7)

Tank-to-pump

a. Using flat-tip screwdriver, pry loose

hydraulic pump

hose (3)

and pull off.

inlet (8)

b. Take out from under truck.

c. Get rid of fluid.

2-1202