TURRET WINCH MOTOR BYPASS HOSE ASSEMBLY

TM 9-2320-269-20-2

TANK - TO - EMERGENCY PUMP HOSE ASSEMBLY - CONTINUED

INSTALLATION - CONTINUED

NOTE

FOLLOW-ON MAINTENANCE:

1. Fill with hydraulic fluid (LO 9-2320-269-12).

2. Operate auxiliary equipment (TM 9-2320-269-10), and

check for proper operation and leaks.

TASK ENDS HERE

TURRET WINCH MOTOR BYPASS HOSE ASSEMBLY

This task covers:

a. Removal

c. Inspection

e.

Pre-Load Check of Bearing

b. Disassembly

d. Reassembly

f.

Installation

INITIAL SETUP:

Tools

Materials/Parts

Pail, utility, 6-qt

Detergent, non-sudsing (item 12, appendix C)

Wrench, open-end, 11/16-inch

Rags, wiping (item 24, appendix C)

Wrench, open-end, 7/8-inch

Solvent, drycleaning (item 28, appendix C)

Tape, teflon (item 32, appendix C)

Personnel Required

One

ACTION

LOCATION

ITEM

REMARKS

REMOVAL

WARNING

Avoid contact with hydraulic fluid. Hydraulic fluid, if splashed on skin or in eyes, can cause irritation.

1.

Two 900 swivel

Turret winch motor

a. Position pail to catch hydraulic fluid.

adapters (1)

bypass hose

b. Using 11/16-inch and 7/8-inch

assembly (2)

wrenches, unscrew and take off.

c. Take out of truck.

d. Dispose of drained fluid,

2-1208