TM 9-2320-269-20-2
LEFT SIDE OUTRIGGER CONTROL VALVE-TO-SOLENOID VALVE RETURN HOSE ASSEMBLY
This task covers:
a.
Removal (page 2-1156)
c.
Inspection/Replacement (2-1158)
b.
Cleaning (page 2-1156)
d.
Installation (page 2-1158)
INITIAL SETUP
Tools
Materials/Parts - Continued
Pail, utility, 3-qt
Solvent, drycleaning (item 28, appendix C)
Wrenches, open-end, 7/8-inch
Tape, teflon (item 32, appendix C)
Wrenches, open-end, 1-inch
Personnel Required
Materials/Parts
One
Detergent, non-sudsing (item 12,
appendix C)
Equipment Condition
Rags, wiping (item 24,
appendix C)
Operator's platform down
(TM 9-2320-269-10).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Avoid contact with hydraulic fluid. Hydraulic fluid, if splashed on skin or in eyes, can cause irritation.
1.
Outrigger tee (1)
Return hose
a.
Position pail to catch hydraulic fluid.
to solenoid valve
assembly (3)
b.
Using 7/8-inch and 1-inch wrenches,
tee (2)
unscrew and take off.
c.
Take out of truck.
d.
Dispose of drained fluid.
CLEANING
WARNING
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame nearby when using
solvent. Failure to observe these precautions could cause serious injury or death.
2-1156
Previous Page
