TM 9-2320-269-20-2
LEFT SIDE OUTRIGGER CONTROL VALVE - TO - SOLENOID VALVE HOSE ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Avoid contact with hydraulic fluid. Hydraulic fluid, if splashed on skin or in eyes, can cause irritation.
1.
90% swivel adapter
Left side outrigger
a. Position pail to catch hydraulic fluid.
(1) and tee (2)
control valve-
b. Using 7/8-inch and 1-inch wrenches,
to-solenoid hose
unscrew and take off.
assembly (3)
c. Take out of truck.
d. Dispose of drained fluid.
CLEANING
WARNING
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame nearby when using
solvent. Failure to observe these precautions could cause serious injury or death.
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-142).
2.
All metal parts
a.
Clean in drycleaning solvent.
b.
Wipe dry with clean, dry rags.
3.
Hose assembly (3)
a.
Clean in clean, soapy water.
b.
Rinse in clean water.
c.
Wipe connectors clean with clean
rags dampened in drycleaning solvent.
d. Wipe dry with clean, dry rags.
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-142).
Replace damaged or defective parts as necessary.
2-1154
Previous Page
