TM 9-2320-269-20-2
LEFT SIDE OUTRIGGER CONTROL VALVE - TO - CONSOLE CM11 VALVE HOSE ASSEMBLY - CONTINUED
INITIAL SETUP
Tools
Personnel Required
Pail, utility, 3-qt
One
Wrench, open-end, 7/8-inch
Wrench, open-end, 1-inch
Equipment Condition
Materials/Parts
Console cover removed (page 2-1092).
Operator's platform down
Detergent, non-sudsing (item 12,
(TM 9-2320-269-10).
appendix C)
Rags, wiping (item 24, appendix C)
Solvent, drycleaning (item 28,
appendix C)
Tape, teflon (item 32, appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Avoid contact with hydraulic fluid. Hydraulic fluid, if splashed on skin or in eyes, can cause
irritation.
1.
Tee (1)
Outrigger valve-to-
a. Position pail to catch hydraulic fluid.
console valve hose
b. Using 7/8-inch and 1-inch wrenches,
assembly (2)
unscrew and take off.
c.
Dispose of drained fluid.
2.
Tee (3)
Outrigger valve-to-
a. Using 7/8-inch and 1-inch wrenches,
console valve hose
unscrew and take off.
assembly (2)
b. Take out of truck.
CLEANING
WARNING
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame
nearby when using solvent. Failure to observe these precautions could cause serious
injury or death.
2-1150
Previous Page
