TM 9-2320-269-20-2
RIGHT SIDE OUTRIGGER CONTROL VALVE - TO - RETURN LINE FILTER HOSE ASSEMBLY
This task covers:
a. Removal(page 2-1146)
c.
Inspection/Replacement(page 2-1147)
b. Cleaning(page2-1146)
d.
Installation(page 2-1147)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Fish tape, 50-ft reel
Rags, wiping (item 24, appendix C)
Pail, utility, 3-qt
Solvent, drycleaning (item 28, appendix C)
Wrench, open-end, 7/8-inch
Tape, teflon (item 32, appendix C)
Wrench, open-end, 1-inch
Personnel Required
Materials/Parts
One
Detergent, non-sudsing (item 12,
appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Avoid contact with hydraulic fluid. Hydraulic fluid, if splashed on skin or in eyes, can cause
irritation.
1.
Svwivel adapter (1)
Outrigger valve-to-
a. Position pail to catch hydraulic fluid.
return line filter
b. Using 7/8-inch and 1-inch wrenches
hose assembly (2)
unscrew and take off.
c.
Dispose of drained fluid.
2.
Swivel adapter (3)
Outrigger valve-to-
a. Using 7/8-inch and 1-inch wrenches,
return line filter
unscrew and take off.
hose assembly (2)
b. Pull out of truck.
CLEANING
WARNING
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame
nearby when using solvent. Failure to observe these precautions could cause serious
injury or death.
2-1146
Previous Page
