TM 9-2320-269-20-2
MODROCK VALVE - TO - RETURN LINE HOSE ASSEMBLY - CONTINUED
INSTALLATION - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE:
1.
Fill with hydraulic fluid (LO 9-2320-269-12).
2.
Operate auxiliary equipment (TM 9-2320-269-10), and check for proper operation and leaks.
TASK ENDS HERE
RIGHT SIDE OUTRIGGER CONTROL VALVE - TO - LEFT SIDE OUTRIGGER CONTROL VALVE HOSE ASSEMBLY
This task covers:
a. Removal(page 2-1143)
c.
Inspection/Replacement(page 2-1144)
b. Cleaning(page2-1144)
d.
Installation(page 2-1145)
INITIAL SETUP:
Tools
Personnel Required
Fish tape, 50-ft reel
One
Pail, utility, 3-qt
Wrench, open-end, 7/8-inch
Equipment Condition
Wrench, open-end, 1-inch
Hydraulic oil tank shutoff valve turned off
Materials/Parts
(TM 9-2320-269-10).
Console cover removed (page 2-1092).
Detergent, non-sudsing (item 12,
appendix C)
Rags, wiping (item 24, appendix C)
Solvent, drylcleaning (item 28,
appendix C)
Tape, teflon (item 32, appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Avoid contact with hydraulic fluid. Hydraulic fluid, if splashed on skin or in eyes, can cause
irritation.
2-1143
Previous Page
