TM 9-2320-269-20-2
WATER JUG HOLDDOWN STRAPS
This task covers:
a. Removal (page 2-894)
b. Replacement (page 2-894)
INITIAL SETUP:
Tools
Personnel Required
Screwdriver, flat-tip, 3/16-inch
Two
Screwdriver, flat-tip, offset,
3/16-inch
Equipment Condition
Wrench, open-end box, 3/8-inch
Water jug removed (TM 9-2320-269-10).
Materials/Parts
Lockwasher, strap brackets to body
(four required)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Strap (1) and
Two screws (4), nuts
a. With assistant working between cab and
bracket (2) to
(5), lockwashers
body, use offset screwdriver and 3/8-
body (3)
(6), strap (1),
inch wrench to unscrew and take out.
and bracket (2)
b. Get rid of lockwashers (6).
2.
Strap (7) and
Two screws (9), nuts
a. With assistant working from under
bracket (8) to
(10), lockwashers
truck, using 3/8-inch wrench and
body (3)
(11), strap (7),
flat-tip screwdriver, unscrew nuts
and bracket (8)
and take out.
b. Get rid of lockwashers (11).
INSTALLATION
3
. Body (3)
Strap (7) and
Put in place, and hold.
bracket (8)
4.
Strap (7) and
Two screws (9)
Put in.
bracket (8) to
body (3)
2-894
Previous Page
