TM 9-2320-269-20-2
CHOCK HOLDDOWN STRAPS
This task covers:
a. Removal (page 2-896)
b. Installation (page 2-897)
INITIAL SETUP:
Tools
Personnel Required
Screwdriver, flat-tip, 3116-inch
Two
Wrench, open-end, 3/8-inch
Equipment Condition
Materials/Parts
Remove chocks (TM 9-2320-269-10).
Lockwasher, strap brackets to body
(four required)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Strap (1) and brac-
Two screws (4),
a. With assistant working from under
ket (2) to body (3)
nuts (5), lockwashers
truck, use 3/8-inch wrench to hold
(6), strap (1), and
nuts (5).
bracket (2)
b. Using flat-tip screwdriver, unscrew
screws (4) and take out.
c. Get rid of lockwashers (6).
2.
Two screws (7)
Two nuts (8) and
a. Using flat-tip screwdriver, hold
lockwashers (9)
screws (7).
b. With assistant working from under truck,
use 3/8-inch wrench to unscrew and
take off.
c. Get rid of lockwashers (9).
3.
Body (3)
Two screws (7),
Take out.
strap (10), and
bracket (11)
INSTALLATION
4.
Body (3)
Strap (10) and
Put in place, and hold.
bracket (11)
5.
Strap (10) and
Two screws (7)
Put in, and hold using flat-tip
bracket (11) to
screwdriver.
body (3)
2-896
Previous Page
