TM 9-2320-269-20-2
BODY MOUNTED SPOTLIGHT
This task covers:
a. Removal (page 2-898)
c.
Installation (page 2-901)
b. Cleaning (page 2-898)
INITIAL SETUP:
Tools
Materials/Parts
Brush, wire
Lockwasher, bracket and plate to clamp
Handle, ratchet, 3/8-inch drive
Rags, wiping (item 24, appendix C)
Screwdriver, cross-tip, number two
Screwdriver, flat-tip
Personnel Required
Socket, 3/8-inch drive, 1/2-inch
Socket, 318-inch drive, 5/8-inch
One
Wrench, open-end, 1/4-inch
Wrench, open-end, 1/2-inch
Wrench, open-end, 9/16-inch
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
If only swivel bracket is being removed, go to step 6.
1.
Retaining ring (1)
Screw (2)
Using cross-tip screwdriver, unscrew
and take out.
2.
Housing (3)
Retaining ring (1)
Unhook, and pull forward.
3.
Lamp (4)
Two screws (5)
a. Using flat-tip screwdriver, loosen
and two
screws (5) and take off terminals (6).
terminals (6)
b. Set lamp (4) aside.
2-898
Previous Page
