TM 9-2320-269-20-2
WINDOW REGULATOR - CONTINUED
INSTALLATION - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE: Install cab door inner panel (page 2-730).
TASK ENDS HERE
CAB DOOR STRIKER PLATE
This task covers:
a. Removal (page 2-750)
c.
Adjustment (page 2-751)
b. Installation (2-751)
INITIAL SETUP:
Tools
Personnel Required
Bit, screwdriver, cross-tip,
One
3/8-inch drive, number four
Handle, hinged, 3/8-inch drive
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
The steps in this task-are the same for both right and left door strikers. The left striker is
used as the example.
1. Striker (1) to
Two screws (3),
Using bit and handle, unscrew and take
door frame (2)
one spacer (4),
off.
one locking ring (5),
and two plastic
washers (6)
2-750
Previous Page
