TM 9-2320-269-20-2
CAB DOOR INNER PANEL
This task covers:
a. Removal (page 2-706)
b. Installation (page 2-731)
INITIAL SETUP:
Tools
Personnel Required
Hammer, ball-peen, machinist's
One
Punch, drive-pin, straight,
1 8-inch
Screwdriver, cross-tip, number two
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Window regulator
Pin (3)
a. Push back escutcheon (4) by hand.
handle (1) to
b. Using punch and hammer, drive out
window regulator
pin (3).
shaft (2)
2.
Window regulator
Window regulator
Take off.
shaft (2)
handle (1) and
escutcheon (4)
3
Door handle (5)
Pin (7)
a. Push back escutcheon (8) by hand.
to door lock
b. Using punch and hammer, drive out
remote control
pin (7).
shaft (6)
4.
Door lock remote
Door handle (5)
Take off.
control shaft (6)
and escutcheon (8)
5.
Inner door panel
Nine screws (11)
Using cross-tip screwdriver, unscrew and
(9) to door (10)
take out.
Lockwashers do not come off
screws (11).
6.
Door (10)
Inner door panel (9)
Take off.
2-730
Previous Page
