TM 9-2320-269-20-2
CAB DOOR WEATHERSEAL
This task covers:
a. Removal (page 2-732)
b. Installation (page 2-733)
INITIAL SETUP:
Tools
Personnel Required
Knife, craftsman's
One
Materials/Parts
Adhesive, liquid rubber (item 2,
appendix C)
Rags, wiping (item 24, appendix C)
Solvent, drycleaning (item 28,
appendix C)
Weatherseal, cab door
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Door (1)
Weatherseal (2)
Using knife, pry weatherseal loose
from door and peel off.
WARNING
Drycleaning solvent is both toxic and flammable. Avoid prolonged breathing of vapors,
and avoid skin contact. Do not use near open flame or excessive heat. Flashpoint of
solvent is 1380F (590C). Dispose of solvent-soaked rags properly.
2.
Door (1)
Using drycleaning solvent and rags, clean all old
cement, dirt, and bits of weather-seal from door.
2-732
Previous Page
