TM 9-2320-269-20-2
CAB INSIDE DOOR AND WINDOW HANDLES
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
6. Handle (1) to
Pin (3)
a. Using punch, push back escutcheon
shaft (2)
(4), and push punch through bottom
hole in handle (1) and shaft (2).
Escutcheon will hold punch in place.
b. Using flat-tip screwdriver, pry back top
of escutcheon (4) just enough to get to
hole in handle (1).
c. Using long round-nose pliers, push pin (3)
into hole in handle (1) and shaft (2).
d. Push out punch.
e. Remove flat-tip screwdriver and long
round-nose pliers.
f. If pin does not go in all the way,
use hammer and punch to drive it into
TASK ENDS HERE
2-745
Previous Page
