TM 9-2320-269-20-2
VENT WINDOW ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY
4. Tension spring (1)
Screw (2)
Using offset cross-tip screwdriver, loosen.
5. Vent window
Glass assembly (4)
a. Push up.
frame (3)
b. Tilt toward post (5) until pin is
clear of frame (3) and weatherseal (6).
c. Take out.
6.
Weatherseal (6)
a. Inspect to see if hard, rotted, torn, or
weather-checked
b. If damaged, pull out and replace.
7. Handle (7) to
Pin (8)
Using hammer and brad, drive out.
glass assembly (4)
8. Glass assembly (4)
Handle (7) and
Take off.
spring washer (9)
ASSEMBLY
9. Glass assembly (4)
Handle (7) and
Put onto pin (10).
spring washer (9)
10. Handle (7) to
Pin (8)
Using hammer, drive in.
glass assembly (4)
11. Vent window
Weatherseal (6)
If removed, lubricate with detergent,
frame (3)
and using flat-tip screwdriver, push into
place.
12. Glass assembly (4)
a.
Tip into frame (3).
b.
Push top pin into top of frame.
c.
Push up.
d.
Push into frame until bottom pin goes
into hole.
13. Tension spring (1)
Screw (2)
Using offset cross-tip screwdriver,
tighten enough so glass (4) is hard to
turn but not locked.
2-742
Previous Page
