TM 9-2320-269-20-2
CAB DOOR LOCK CYLINDER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY
8. Lock cylinder (4)
Key (5)
Put in.
9. Lock shaft (7)
Put in place against back of cylinder
Tab on cylinder engages latch on
shaft.
10. Lock cylinder
Lock shaft (7)
Push in until retainer (6) snaps into
assembly (1)
and lock
place on cylinder (4).
cylinder (4)
11.
Key (5)
Take out.
INSTALLATION
12. Door (2)
Retaining
Put in half way so large hole in spring
spring (3)
(3) lines up with hole in door (2).
13.
Lock cylinder
a. Cut welding rod to 6-inch length (15 cm)
assembly (1)
with diagonal cutting pliers.
b. Using bench grinder, grind point on
welding rod.
c. Push rod through access hole.
d. Put cylinder assembly (1) into door (2).
e. Guide into place using welding rod
inserted in end of lock shaft (7).
f. Put cylinder assembly (1) into place.
14. Lock cylinder
Retaining
Push in place
assembly (1)
spring (3)
TASK ENDS HERE
2-739
Previous Page
