TM 9-2320-269-20-2
CAB DOOR LOCK CYLINDER
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Tools-Continued
Brad
Welding rod, steel, 1/16-inch diameter
Grinder, bench
Pliers, diagonal cutting
Personnel Required
Pliers, long round-nose
Screwdriver, flat-tip, 3/8-inch
One
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
The steps in this task are the same for right and left door lock cylinder assembly. The
left door lock cylinder is used as the example.
1. Lock cylinder
Retaining
Using flat-tip screwdriver, pry out
assembly (1)
spring (3)
part way.
to door (2)
2. Door (2)
Lock cylinder
Take out.
assembly (1)
3.
Retaining spring (3)
Using long round-nose pliers, pull out.
DISASSEMBLY
4. Lockcylinder(4)
Key (5)
Put into cylinder (4).
5. Lock cylinder
Lock cylinder (4)
a. Using brad, pry up retainer (6).
assembly (1)
b. Pulling on key (5), pull out
cylinder (4).
6.
Lock shaft (7)
Using brad, lift retainer (6) and take out.
7. Lock cylinder (4)
Key (5)
Take out.
2-738
Previous Page
