TM 9-2320-269-20-2
WINDOW REGULATOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL- CONTINUED
3. Regulator
Handle (2)
Put onto shaft and roll down all the
shaft (1)
way.
4. Retainer
Clip (5)
Using flat-tip screwdriver, push off.
channel (3)
to regulator
arm (4)
5. Retainer
Regulator
Pull out of large hole at one end of
channel (3)
arm (4)
retainer channel (3), and slide glass
assembly to bottom of door.
6. Regulator
Handle (2)
Take off.
shaft (1)
7. Regulator (6)
Four screws (8)
Using 5/16-inch socket and handle,
to door (7)
unscrew and take out.
8. Door (7)
Regulator (6)
Take out of door (7).
INSTALLATION
9. Door (7)
Regulator (6)
Put into place inside door (7).
10. Regulator (6)
Four screws (8)
Screw in, and tighten using 5/16-inch
to door (7)
socket and handle.
11. Regulator
Handle (2)
Put onto regulator shaft, and roll down
shaft (1)
regulator arm (4) all the way.
12. Regulator
Retainer
Pull up, and push stud (9) on regulator
arm (4)
channel (3)
arm (4) through large hole in retainer
2-748
Previous Page
