REAR HUB AND DRUM ASSEMBLY AND WHEEL BEARINGS - CONTINUED

TM 9-2320-269-20-1

REAR HUB AND DRUM ASSEMBLY AND WHEEL BEARINGS - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

REMOVAL - CONTINUED

5. Axle (1)

Hub (2) and drum (3)

With assistant, pull hub and drum

and wheel bearing (4)

(2) forward enough to free

bearing (4).

Push hub and drum (2) back.

Wheel bearing (4)

Take out.

WARNING

Be careful when working with large or heavy objects to avoid personnel injury.

Hub (2) and drum (3)

With assistant, using dolly jack, lift

off axle (1) and take out.

8. Hub (2) and

Grease seal (5) and

Using 3/8-inch flat-tip screwdriver,

drum (3)

washer (6)

pry out and get rid of seal (5).

Take out washer (6).

Wheel bearing (7)

Take out.

CAUTION

Do not remove bearing races unless damaged.

Always replace bearings and races together to avoid damage to new part from wear patterns on old parts.

NOTE

If hub and drum assembly is being removed for access to other components, go to INSTALLATION.

2-630

Index