TM 9-2320-269-20-1
FRONT HUB AND DRUM ASSEMBLY AND WHEEL BEARINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ADJUSTMENT - CONTINUED
32. Hub (12)
Grease cap (9)
a.
Take off.
and gasket (13)
b.
Get rid of gasket (13).
33. Spindle (14)
Lockring (15) and
a.
Using hammer and chisel, straighten
locknut (16)
lockring (15).
b.
Using 2 7/8-inch socket and handle
with 314-inch drive, unscrew and take
off nut (16), and get rid of
lockring (15).
34.
Locknut (17)
Using 2 718-inch socket and handle with
3/4-inch drive, loosen nut (17), then
tighten until snug.
35. Hub (12)
Wheel and tire (5)
Install (page 2-611).
36. Spindle (14)
Locknut (17)
a.
Using 2 7/8-inch socket and torque
wrench, tighten to 50 ft-lb (69 N m)
of torque while turning tire (5).
b.
Using 2 7/8-inch socket and handle
with 3/4-inch drive, unscrew nut (17)
one-quarter turn.
TA228967
2-625
Previous Page
