TM 9-2320-269-20-1
AIR COMPRESSOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
24.
Crankshaft (13)
Woodruff key (14)
Fit key (14) into crankshaft (13), and
and pulley (15)
slide pulley (15) on.
25.
Pulley (15)
Nut (16) and new
a. Screw in, and tighten nut (16) using
cotter pin (17)
1 118-inch socket and handle with
1/2-inch drive.
b. Hold pulley (15) in place with pry bar.
c. Put cotter pin (17) in place
using diagonal cutting pliers.
26.
Base (18)
Air compressor (1)
a. Clean any gasket material from base
and new gasket (19)
(18) and compressor (1) with putty
knife.
b. Put compressor (1) and gasket (19) on.
27.
Air compressor (1)
Four screws (20) and
Screw in, and tighten using 5/8-inch wrench.
TA228952
2-599
Previous Page
