TM 9-2320-269-20-1
AIR COMPRESSOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
9.
Base (1)
Four screws (2) and
a. Using rag, clean base (1).
Iockwashers (3)
Avoid getting dirt into engine (4).
b. Using 5/8-inch wrench, unscrew
and take off.
c. Get rid of lockwashers (3).
10.
Flange (5)
Air compressor (6)
a. Lift off flange (5).
and gasket (7)
b. Get rid of gasket (7).
NOTE
If air compressor is being removed for access to other components, go to INSTALLATION.
11.
Crankshaft (8)
Cotter pin (9) and
a. Using diagonal cutting pliers, take out
nut (10)
and get rid of cotter pin (9).
b. Hold pulley (11) with pry bar.
c. Using 1 1/8-inch socket and handle
with 1/2-inch drive, unscrew and take
off nut (10).
TA228950
2-596
Previous Page
