TM 9-2320-269-20-1
FUEL GAGE SENDING UNIT
This task covers:
a. Removal (page 2-394)
b. Installation (page 2-394)
INITIAL SETUP
Tools
Personnel Required
Scraper, gasket
One
Screwdriver, cross-tip, number two
Equipment Condition
Material/Parts
Battery ground cable disconnected
(page 2-4141)
Gasket, mounting, sending unit
Fuel tank removed (page 2-160).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Sending unit (1)
Five screws (2)
Using cross-tip screwdriver, unscrew
and take out.
2.
Fuel tank (3)
Sending unit (1)
Take out.
3.
Sending unit
a.
Using gasket scraper, take off.
gasket (4)
b.
Get rid of.
INSTALLATION
NOTE
Before installing new gasket, be sure tank and sending unit are free of old gasket material to insure proper seal.
4.
Fuel tank (3)
New sending unit
Put on.
gasket (4)
5.
Sending unit (1)
Put in.
6.
Sending unit (1)
Five screws (2)
Screw in, and tighten using cross-tip
screwdriver.
2-394
Previous Page
