TM 9-2320-269-20-1
ROTATING WARNING LIGHT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
4.
Lampholder (1)
Retaining ring (2)
Take off.
5.
Bulb (3)
Take off.
6.
Two lead wire
Two lead wire
Using flat-tip screwdriver, unscrew
terminals (4)
screws (5)
part way.
7.
Two lead wires (6)
a.
Take off.
b.
Tag wires (6).
c.
Repeat steps 4 thru 7 for removal of
other bulb.
INSTALLATION
8.
Two lead wire
Two lead wires (6)
a. Take off tags.
terminals (4)
b. Hold bulb (3) over lampholder (1),
and put on lead wires.
9.
Two lead wire
Tighten using flat-tip screwdriver.
screws (5)
10.
Lampholder (1)
Bulb (3)
a.
Put in.
b.
Line up tab (7).
11.
Retaining ring (2)
a.
Lift upward onto bulb (3).
b.
Repeat steps 8 thru 11 for other bulb.
12.
Lens retaining
New lens gasket (9)
Put on.
ring.
13.
Lampholder (1)
Lens (10) and
Put on, and tighten into place turning
retaining ring (8)
clockwise.
2-392
Previous Page
