TM 9-2320-269-20-1
SPOTLIGHTS,CAB MOUNTED - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
12.
Spotlight arm
Screw (2)
Using 3/8-inch wrench, unscrew
clamp (1)
part way.
13.
Spotlight arm (3)
Spotlight arm
Take off.
clamp (1)
14.
Spotlight base(4)
Three screws (5)
Using flat-tip screwdriver, unscrew
15.
Cab (6)
Spotlight
a.
Take off.
assembly (7) and
b.
Get rid of gasket (8).
gasket (8)
INSTALLATION
NOTE
If only spotlight is being installed, go to step 25.
Before installing new gasket, be sure gasket mating surfaces are free of dirt or old gasket material to
insure proper seal.
16.
Cab (6)
New gasket (8) and
Put in position.
spotlight
assembly (7)
17.
Spotlight base (4)
Three screws (5)
Screw in, and tighten using flat-tip
screwdriver.
18.
Spotlight
Put in.
mounting screw (9)
19.
Spotlight arm (3)
Spotlight arm
Put on.
clamp (1)
20.
Spotlight arm
Screw (2)
Screw in, and tighten using 3/8-inch
clamp (1)
wrench.
2-388
Previous Page
