TM 9-2320-269-20-1
SPOTLIGHTS, CAB MOUNTED
This task covers:
a. Removal (page 2-386)
b. Installation (page 2-388)
INITIAL SETUP
Tools
Materials/Parts
Screwdriver, cross-tip, number one
Gasket, spotlight
Screwdriver, flat-tip, 1/4-inch
Gasket, spotlight base
Wrench, open-end, 5/16-inch
Lockwasher, spotlight arm clamp
Wrench, open-end, 3/8-inch
Tags, marking (item 29, appendix C)
Personnel Required
One
ACTION
LOCATION
ITEM
REMARKS
NOTE
REMOVAL
This procedure is for left side spotlight. The procedure for right side spotlight is the same.
1.
Retaining ring (1)
Screw (2)
Using cross-tip screwdriver, unscrew
and take out.
2.
Spotlight
Retaining ring (1)
Take off.
housing (3)
and spotlight (4)
3.
Two lead wire
Two screws (6)
Using flat-tip screwdriver, unscrew
terminals (5)
part way.
4.
Two lead wires (7)
a.
Take off.
b.
Tag wires.
5.
Retaining ring (1)
Four clips (8)
Using flat-tip screwdriver, pry out.
6.
Spotlight (4)
a.
Takeout.
and gasket (9)
b.
Get rid of gasket (9).
NOTE
If only spotlight is being removed, go to INSTALLATION.
2-386
Previous Page
