TM 9-2320-269-20-1
FUEL TANK
This task covers:
a. Removal (page 2-160)
c. Assembly (page 2-164)
b. Disassembly (page 2-163)
d. Installation (page 2-164)
INITIAL SETUP
Tools
Materials/Parts
Brush, wire
Fuel, diesel (item 16, appendix C)
Drum, fuel, 55- gallon capacity
Lockwasher, fuel gage terminal
Handle, ratchet, 1/2-inch drive
(two required)
Pliers, round-nose, long
Lockwasher, fuel pump terminal
Pump, transfer
Lockwasher, hanger strap to hanger
Screwdriver, cross-tip, number two
(two required)
Screwdriver, flat-tip, 3/8-inch
Oil, penetrating (item 23, appendix C)
Socket, deep well, 1/2-inch drive,
Tags, marking (item 29, appendix C)
15116-inch
Tape, teflon (item 32, appendix C)
Truck, lift
Wrench, adjustable, 10-inch
Personnel Required
Wrench, open-end, 3/8-inch
(two required)
Two
Wrench, open-end, 9/16-inch
Wrench, open-end, 5/8-inch
Equipment Condition
Wrench, open-end, 3/4-inch
Wrench, open-end, 7/8-inch
Battery ground cable disconnected
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
Cover all lines and fittings to keep dirt from entering system.
1. Retaining strap (1)
Nut (3) and strap
If necessary, use wire brush to clean
and hanger (2)
threads (4)
dirt and apply penetrating oil.
2-160
Previous Page
