TM 9-2320-269-20-1
INSTRUMENT PANEL ILLUMINATION LIGHTS
This task covers:
a. Removal (page 2-330)
b. Installation (page 2-331)
INITIAL SETUP:
Tools
Personnel Required
Crimping tool
One
Pliers, diagonal cutting
Stripper, wire
Equipment Condition
Materials/Parts
Battery ground cables disconnected
Terminal, wire
Instrument panel remo ved (page 2-326).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
CAUTION
Be careful when working behind dash panel. You may damage hardware or disconnect
electrical wiring.
NOTE
To replace bulb only, skip steps 3 and 4.
1.
Instrument panel (1)
Light socket (2)
Reach behind panel (1), and pull
from
fitting (3).
2.
Light socket (2)
Bulb (4)
Take out, turning counterclockwise while
pressing inward.
3.
Instrument panel (1)
Lead wire (5) and
a.
Using diagonal cutting
pliers, cut
socket (2)
lead wire (5) two inches (50.8 mm)
from base of socket (2).
b.
Take out socket (2).
2-330
Previous Page
