TM 9-2320-269-20-1
INSTRUMENT PANEL ILLUMINATION LIGHTS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
NOTE
If only the bulb is being installed, go to step 6.
Use tag wires to insure proper hookup.
4.
Socket lead wire (6)
Terminal (7) a.
Using wire stripper, strip 1/2-inch
and harness lead
(12.69 mm) of insulation from wires
wire (5)
(5) and (6), and fold back onto
casting (8).
b. Put wires (5) and (6) into terminal (7),
and crimp together using crimping
tool.
5.
Light socket (2)
Bulb (4)
Press in and turn clockwise.
6.
Instrument panel (1)
Light socket (2)
Press into fitting (3) from behind
instrument panel (1).
NOTE
FOLLOW-ON MAINTENANCE:
1. Install instrument panel (page 2-326).
2. Connect battery ground cable (page 2-414).
3. Turn on illumination lights, and check for proper operation (TM 9-2320-269-10).
TASK ENDS HERE
TA228785
2-331
Previous Page
