TM 9-2320-269-20-2
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
NOTE
If only adapter was removed, go to step 13.
9.
Cable mount (1)
Cable (2)
Put in, and tighten.
10.
Cable (2)
Clamp (3)
Put on, and press together.
11.
Clamp (3) and
Screw (5)
a. Hold clamp (3) against bracket (4).
bracket (4)
b. Put screw (5) through clamp (3) and
bracket (4).
12.
Screw (5)
New lockwasher (6)
Screw in, and tighten using 7/16-inch
and nut (7)
socket, handle, and 7/16-inch wrench.
13.
Cable (8)
Adapter (9)
Put in, and tighten using 1-inch wrench.
NOTE
If only cable is being installed, go to FOLLOW-ON MAINTENANCE.
14.
Adapter (9)
Sensor (10)
Screw in, and tighten using 1-inch
wrench.
15.
Adapter (9)
Cable (2)
Put in, and tighten using 1-inch wrench.
2-1352