TM 9-2320-269-20-2
AIR PRESSURE GAGES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
11.
Two studs (6)
Two nuts (7) and new
Screw on, and tighten using 3/8-inch
lockwashers (8)
wrench.
NOTE
If both gages were removed, check tag markings from removal to insure proper hookup.
12.
Fitting (4)
Line (9) and line
Screw on. and tighten using two 9/16-
nut (10)
wrenches
NOTE
FOLLOW-ON MAINTENA NCE:
1.
Connect battery ground cable (page 2-414).
2.
Close reservoir draincocks (page 2-106).
3.
Check gages for proper operation (TM 9-2320-269-10).
TASK ENDS HERE
TA229701
2-13571(2-1358 blank)
Previous Page
