TM 9-2320-269-20-2
TACHOMETER ADAPTER AND CABLE
This task covers:
a. Removal (page 2-1350)
b. Installation (page 2-1352)
INITIAL SETUP
Tools
Personnel Required
Handle, ratchet, 3/8-inch drive
One
Pliers, slip-joint
Socket, 3/8-inch drive, 7/16-inch
Equipment Condition
Wrench, open-end, 7/16-inch
Wrench, open-end, 1-inch
Battery ground cable disconnected
(page 2-414).
Materials/Parts
Engine left side hood panel raised
(page 2-7).
Lockwasher, clamp-to-cable
Engine cover removed for cable removal
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
If only cable is being removed, go to step 3.
1.
Adapter (1)
Sensor (2)
Using 1-inch wrench, unscrew and take
off.
2.
Cable (3)
Using 1-inch wrench, unscrew and take
off.
3.
Cable (4)
Using 1-inch wrench, unscrew and take
off.
4.
Cables (3) and (4)
Adapter (1)
a. If removing adapter (1), take out.
b. If removing cable (4), set adapter (1)
aside.
2-1350
Previous Page
