TM 9-2320-269-20-2
TACHOMETER AND CABLE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
NOTE
If tachometer was disconnected for instrument panel removal, go to step 18.
10.
Adapter (1)
Sensor (2)
Screw in, and tighten using 1-inch
wrench
11.
Cable (3) and
Screw in, and tighten using 1-inch
nut (4)
wrench.
12.
Firewall (5)
Cable (3)
Push through.
NOTE
If only cable is being installed, go to step 17.
13.
Instrument panel (6)
Tachometer (7)
Put in, and hold in position.
14.
Brackets (8) and (9)
Put in, and hold in position.
15.
Two studs (10)
Two nuts (11) and
Screw on and tighten, using 3/8-inch
flat washers (12)
wrench.
16.
Tachometer (7)
Light socket (13)
Push in place.
17.
Cab
Instrument panel
Install (page 2-326).
18.
Cable (3) and
Screw in, and tighten.
nut (14)
2-1348
Previous Page
