TM 9-2320-269-20-2
AIR HORN - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
22.
Horn (1)
Nipple (2)
a. Wrap upper threads of nipple (2)
with teflon tape.
b. Screw into horn (1), and tighten
using pipe wrench.
23.
Cab roof (3)
New gasket (4)
Have assistant put in place.
24.
Gasket (4) and
Horn (1)
Have assistant put in place.
roof (3)
25.
Horn (1)
Three screws (5)
Have assistant put in place and,
using 7/16-inch wrench, hold.
26.
Three screws (5)
Reinforcement (6)
Put in place, and hold.
27.
Three nuts (7)
Screw on, and tighten using 7/16-inch
socket and handle
28.
Nipple (2)
Elbow (8)
Screw in, and tighten using 5/8-inch Mu
wrench.
29.
Elbow (8)
Insert (9)
Put in, and seat using hammer.
30.
Air line (10)
Apply detergent, and push into elbow
until seated.
31.
Air line (10)
Nut (11)
Screw onto elbow (8), and tighten
to elbow (8)
using 9/16-inch wrench.
32.
Pedestal (12)
New gasket (13)
Have assistant put together.
33.
Grommet (14)
Have assistant put in place.
34.
Horn (1)
Pedestal (12)
Have assistant slide onto long bell
(15) and into place.
2-1328
Previous Page
