TM 9-2320-269-20-2
AIR HORN VALVE - CONTINUED
INSTALLATION - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE: Pressurize air system (TM9-2320-269-10), and check
for leaks.
TASK ENDS HERE
AIR HORN
This task covers:
a. Removal (page 2-1325)
c.
Installation (page 2-1328)
b. Repair (page 2-1326)
INITIAL SETUP:
Tools
Materials/Parts
Brush, scratch, wire
Detergent, liquid (item 11,
Hammer, plastic
appendix C)
Handle, ratchet, 3/8-inch drive
Gasket, bell pedestal-to-cab
Pliers, long-nose
Gasket, horn-to-cab
Screwdriver, cross-tip,
Lockwasher, bell pedestal-to-cab
number two
Tape, teflon (item 32, appendix C)
Screwdriver, flat-tip, 3/8-inch
7/16-inch
Personnel Required
Wrench, box-end, 7/16-inch
Wrench, box-end, 5/8-inch
Two
Wrench, box-end, 9/16-inch
Wrench, pipe, 1/4 to 1-inch
Equipment Condition
Headlining panels removed (page 2-838).
Air reservoirs drained (page 2-106).
2-1324
Previous Page
