TM 9-2320-269-20-2
AIR HORN VALVE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
10.
Valve (1) to
Two screws (3) and
Using cross-tip screwdriver, unscrew
cab (2)
valve (1)
and take out.
11.
Valve (1)
Two screws (3)
Take out.
INSTALLATION
12.
Cab (2)
Valve (1)
Put in place, and hold.
13.
Valve (1) to
Two screws (3)
Screw in, and tighten using cross-tip
cab (2)
screwdriver.
14.
Valve (1)
Two inserts (4)
a. Push into fittings (5) and (6).
b. Seat using hammer.
15.
Front air line (7)
Rub lightly with detergent, and push
into fitting (5) until seated.
16.
Front air line (7)
Nut (8)
Screw on, and tighten using
to valve (1)
9/16-inch wrench.
17.
Valve (1)
Upper air line (9)
Rub lightly with detergent, and push into
fitting (6) until seated.
TA22683
2-1322
Previous Page
