TM 9-2320-269-20-2
REAR VIEW MIRROR ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ADJUSTMENT - CONTINUED
45.
Mirror holder
Two screws (3) and
Tighten using 1/2-inch wrench,
bracket (1) to
nuts (4)
1/2-inch socket, and handle, making
support
sure not to change adjustment.
brackets (2)
46.
Mirror head (5) to
Screw (6)
Tighten using 7/16-inch socket and
to mirror holder
handle, making sure not to change
bracket (1)
adjustment.
47.
Nut (7)
Tighten using 7/16-inch socket and handle,
making sure not to change adjustment.
48.
Convey mirror (8)
Screw (9)
Using flat-tip screwdriver, loosen.
to mirror head (5)
49
.
Convey mirror (8)
Adjust to operator's satisfaction.
50.
Screw (9)
Tighten using flat-tip screwdriver,
making sure not to change adjustment.
51.
Right mirror
Repeat steps 41 to 46.
Assembly
2-1318
Previous Page
