TM 9-2320-269-20-2
FAN/TEMP SWITCH AND CABLE
This task covers:
a. Removal (page 2-1292)
b. Installation (page 2-1292)
INITIAL SETUP:
Tools
Materials/Parts
Chisel, hand, cold, 3/8-inch
Pushnut, FAN/TEMP cable-to-
Hammer, hand, ball-peen,
temperature valve
machinist's
Tags, marking (item 29, appendix C)
Handle, ratchet, 1/4-inch drive
Key, screw, socket-head, 5/64-inch
Personnel Required
Pliers, slip-joint, straight-nose
Screwdriver, flat-tip, 3/16-inch
One
Socket, 1/4-inch drive, 1/4-inch
Equipment Condition
Battery ground cable disconnected
(page 2-414).
Open right side of hood
(page 2-7).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
FAN/TEMP cable (1)
Pushnut (3)
a.
Using pliers, squeeze and take off.
to valve (2)
b.
Get rid of.
2.
FAN/TEMP cable (1)
Clip (5) and
Using 1/4-inch socket and handle,
to pin of valve
screw (6)
unscrew and take off.
lever (4)
3.
Valve (2)
Cable (1)
Take off.
CAUTION
Do not tear or damage grommet when removing from firewall.
2-1292
Previous Page
