TM 9-2320-269-20-2
BLOWER ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY
15.
Blower wheel (1)
Setscrew (3)
Using 118-inch key, unscrew and take out.
to motor (2)
CAUTION
If blower wheel sticks on motor shaft, do not strike or pull against outside rim of blower wheel or you will bend
wheel.
16.
Motor (2)
Blower wheel (1)
Take off.
You may have to tap hub (4) of
blower wheel (1) several times
using hammer and punch to break
it loose from motor shaft (5).
17.
Mounting plate
Two nuts (7) and
a. Using 3/8-inch wrench, unscrew and
(6) to motor (2)
lockwashers (8)
take off.
b. Get rid of lockwashers (8).
18.
Motor (2)
Mounting plate (6)
Take off.
ASSEMBLY
19.
Motor (2)
Mounting plate (6)
Put in place.
20.
Mounting plate (6)
Two new
Screw on, and tighten using 3/8-inch
to motor (2)
lockwashers (8)
wrench.
and nuts (7)
2-1264
Previous Page
