TM 9-2320-269-20-2
CONSOLE CM11 VALVE - TO - RETURN LINE FILTER HOSE ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Avoid contact with hydraulic fluid. Hydraulic fluid, if splashed on skin or in eyes, can
cause irritation.
1.
Tee (1)
CM11 valve-to-
a. Position pail to catch hydraulic
return line filter
fluid.
hose assembly (2)
b. Using 7/8-inch and 1-inch wrenches,
unscrew and take off.
c. Dispose of drained fluid.
2.
Straight
CM11 valve-to-
a. Using 7/8-inch and 1-inch wrenches,
swivel adapter (3)
return line filter
unscrew and take off.
hose assembly (2)
b. Pull out of truck.
CLEANING
WARNING
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame
nearby when using solvent. Failure to observe these precautions could cause serious
injury or death.
NOTE
For more information on how to clean parts, go to General Maintenance Instructions
(page 2-142).
3.
All metal parts
a. Clean in drycleaning solvent.
b. Wipe dry with clean, dry rags.
4.
Hose assembly (2)
a. Clean in clean, soapy water.
b. Rinse in clean water.
c. Wipe connectors clean with clean rags
dampened in drycleaning solvent.
d. Wipe dry with clean, dry rags.
2-1118
Previous Page
