TM 9-2320-269-20-2
CONSOLE CM11 VALVE - TO - SINGLE SELECTOR VALVE HOSE ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
1.
450 swivel
Console CM11 valve-
a. Position pail to catch hydraulic
adapter (1)
to-single selector
fluid.
valve hose
b. Using 7/8-inch and 1-inch wrenches,
assembly (2)
unscrew and take off.
c.
Dispose of drained fluid.
2.
900 swivel
Console CM11 valve-
a. Using 7/8-inch and 1-inch wrenches,
adapter (3)
to-single selector
unscrew and take off.
valve hose
b. Pull out of truck.
assembly (2)
CLEANING
WARNING
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame
nearby when using solvent. Failure to observe these precautions could cause serious
injury or death.
NOTE
For more information on how to clean parts, go to General Maintenance Instructions
(page 2-142).
3.
Hose assembly (2)
a. Clean in clean, soapy water.
b.
Rinse in clean water.
c.
Wipe connectors clean with clean rags
dampened with drycleaning solvent.
d.
Wipe dry with clean, dry rags.
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions
(page 2-142).
Replace damaged or defective parts as necessary.
4.
Hose assembly (2)
a
Look for ctracks, breaks, tears,
and brittleness.
b.
Look for loose connectors.
c.
Look for damaged threads.
2-1122
Previous Page
