TM 9-2320-269-20-2
POLE GUIDE ARMS HYDRAULIC DRIVE LINES
This task covers:
a. Removal (page 2-1024)
c.
Inspection/Replacement (page 2-1029)
b. Cleaning (page 2-1029)
d.
Installation (page (page 2-1030)
INITIAL SETUP:
Tools
Materials/Parts
Fish tape, 50-ft reel
Detergent, non-sudsing (item 12,
Handle, ratchet, 3/8-inch drive
appendix C)
Pail, utility, 3-qt
Lockwashers, housing cover (12 required)
Socket, 3/8-inch drive, 7116-inch
Nuts, elastic stop, hose bracket
Socket, 3/8-inch drive, 9/16-inch
(two required)
Wrench, open-end, 1/2-inch
Rags, wiping (item 24, appendix C)
Wrench, open-end, 9/16-inch
Solvent, drycleaning (item 28,
Wrench, open-end, 5/8-inch
appendix C)
Wrench, open-end, 11/16-inch
Tags, marking (item 29, appendix C)
Tape, teflon (item 32, appendix C)
Personnel Required
Two
Equipment Condition
Console cover removed (page 2-1092).
Telescopic tubes removed (page 2-1094).
2-1023
Previous Page
