TM 9-2320-269-20-2
FRONT WINCH HYDRAULIC DRIVE LINES
This task covers:
a. Removal (page 2-993)
c. Inspection/Replacement (page 2-998)
b. Cleaning (page 2-997)
d. Installation (page 2-998)
INITIAL SETUP
Tools
Materials/Parts
Handle, ratchet, 3/8-inch drive
Detergent, non sudsing (item 12, appendix C)
Pail, utility, 3-qt
Lockwasher, hose clamp (two required)
Socket, 3/8-inch drive, 7/16-inch
Rags, wiping (item 24, appendix C)
Wrench, open-end, 7/16-inch
Solvent, drycleaning (item 28, appendix C)
Wrench, open-end, 7/8-inch
Tags, marking (item 29, appendix C)
Wrench, open-end, 1-inch (two required)
Tape, teflon (item 32, appendix C)
Wrench, open-end, 1 1/16-inch
Wrench, open-end, 1 1/8-inch
Personnel Required
Wrench, open-end, 1 1/4-inch
Wrench, pipe, adjustable jaw
Two
1-to 2-inch (two required)
Equipment Condition
Console cover removed (page 2-1092).
Left side engine compartment hood
open (page 2-7).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Avoid contact with hydraulic fluid. Hydraulic fluid, if splashed on skin or in eyes, can cause irritation.
2-993
Previous Page
