TM 9-2320-269-20-2
FRONT WINCH HYDRAULIC DRIVE LINES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions (page
2-142).
Replace damaged or defective parts as necessary.
20.
All hose
a. Look for cracks, breaks, tears, and
assemblies
b. Look for loose connectors.
c. Look for damaged threads.
INSTALLATION
NOTE
Before installing hose assemblies, wrap all clean, external threads with two turns of teflon
tape (page 2-142).
21.
Coupling
Coupling-to-front
a. Check tag for proper location,
locknut (1)
winch motor hose
and take off.
assembly (2)
b. Screw on, and tighten using 1-inch
and 1 1/8-inch wrenches.
22.
Adapter (3)
Coupling locknut (1)
Tighten using two 1-inch pipe wrenches.
90 swivel
23.
Coupling-to-front
a. Check tag for proper location,
adapter (4)
winch motor hose
and take off.
assembly (5)
b. Screw on, and tighten using 1-inch
pipe wrench and 7/8-inch wrench.
2-998
Previous Page
